Toto spares, Toto parts, Toto spare parts, Spare code no : TX469SECK4 - Mixer shower dual lever with...

Toto spares, Toto parts, Toto spare parts, Spare code no : TX469SECK4 - Mixer shower dual lever with diverter,

• On TOTO Chennai / TOTO spares listings, TX469SECK4 is listed under “Mixer shower dual lever with Diverter” among the TOTO products / spares they stock or list. bechennai.com
• 
  
• TOTO Indonesia has listings for models in the TX469 family (e.g. TX469SI) described as “Mixer Shower Dual Lever with Diverter” in their “Bath / Fittings” category. TOTO
• 
  
• The listing for TX469SI (its sibling) gives key data:
• Working pressure range: 0.05 MPa to 0.75 MPa TOTO
• 
  
• The product is flagged as DISCONTINUED in the catalog. TOTO

So TX469SECK4 is part of the TX469 dual‑lever mixer / diverter family and is likely to share many specifications with those listed by TOTO (even if the exact “SECK4” variant is not presently documented in the public catalog).

Uses / Applications

A “Mixer Shower Dual Lever with Diverter” like TX469SECK4 is used in bathrooms (bathtub + shower setups or shower only) to provide:

1. Mixing of hot and cold water

• One lever controls / regulates temperature by blending hot and cold water inputs.
• 
  
• The other lever (or integrated mechanism) controls the flow rate (volume) or on/off.

1. Diverter function

• The diverter enables switching between two outlets (e.g. bathtub spout vs overhead / hand shower) via internal valve action.
• 
  
• When you pull or twist the diverter (often part of the spout or handle), water is redirected from spout to shower head, or vice versa.

1. Shower / bath combination setups

• It is typically installed in setups where both a bath spout (filling the tub) and a shower head (or hand shower) are used.
• 
  
• It allows the user to choose where the water goes (bath / shower) and at what temperature and volume.

1. Residential / commercial bathroom usage

• In homes, hotels, apartments, etc. where a bathtub + shower combination is present.
• 
  
• Also in retrofit / replacement scenarios for TOTO or compatible plumbing systems.

Expected / Likely Specifications & Characteristics

Because the public documentation for “SECK4” is not directly available, but referencing TOTO’s sibling models, here are the expected / likely specs:

ParameterLikely / Typical ValueNotes / BasisWater pressure range (min‑max)0.05 MPa to 0.75 MPaMatches TX469SI specification in TOTO’s catalog for similar dual lever models. TOTO Indonesia

TypeExposed mixer (i.e. mounted on wall surface)Usually dual lever mixers are exposed typeConnections / thread standardStandard plumbing inlets (e.g. G½ or similar)Likely same as other TOTO mixers; must confirm with the unit or installation manualMaterial / finishBrass body + chrome or corrosion-resistant surfaceTypical for TOTO bathroom fittingsFlow characteristicsBalanced / calibrated so that adequate flow is delivered under mid to higher pressureThe diverter and mixing bodies will be dimensioned to minimize pressure dropDiverter mechanismInternal diverter valve to toggle between two pathsThe internal diverter must be robust to avoid leakage between outletsDiscontinued statusVery possible (or variant may be phased out)Many of the TX469 variants in TOTO’s catalog are marked as discontinued or legacy models (e.g. TX469SI is flagged as discontinued) TOTO Indonesia

What to check / verify if installing or replacing TX469SECK4

If you are going to install, maintain, or replace this mixer, here are the things you should confirm:

• Inlet plumbing compatibility
• Make sure your hot and cold supply lines match the mixer’s inlets (size, thread standard, orientation).
• Wall mounting / clearances
• The distance from wall to spout or levers, and alignment with shower head / tub spout.
• Diverter sealing & reliability
• The diverter must switch cleanly without leakage, and its seals / cartridges should be serviceable / replaceable.
• Cartridge / internal parts
• Make sure replacement cartridges, seats, seals, O-rings are available or compatible with current TOTO standard parts.
• Pressure suitability
• Your water pressure should fall within the operational range (0.05 to 0.75 MPa) for stable performance.
• Discontinued / replacement compatibility
• Since many TX469 models are discontinued, check whether TOTO has a newer replacement or compatible unit with the same plumbing interface.

TOTO flush valve replacement, TOTO fill valve repair kit, TOTO toilet flapper replacement, TOTO bidet nozzle parts, TOTO faucet cartridge, TOTO shower diverter valve, TOTO sink drain assembly, TOTO tub spout replacement, TOTO toilet seat hinge bolts, TOTO valve seal kit, TOTO handle replacement, TOTO O-ring set, TOTO gasket washer kit, TOTO inlet valve assembly, TOTO aerator adapter in ANDAMAN NICOBAR.

TOTO faucet replacement, TOTO toilet flush valve, TOTO sink drain assembly, TOTO shower head gasket, TOTO toilet seat hinge, TOTO tub spout diverter, TOTO O-ring seal, TOTO gasket washer, TOTO cartridge valve, TOTO flush handle, TOTO overflow plate, TOTO trap seal, TOTO bidet nozzle, TOTO escutcheon plate, TOTO pop-up drain stopper in INDIA.

Email: www.bechennai.com, Mobile no : 888 333 33 22.