Latest updates

Toto spares, Toto parts, Toto spare parts, Spare code no : HH55007 - SHXA19 - solenoid valve unit,

What a Solenoid Valve Unit Typically Does (in TOTO Toilets/Washlets etc.)

A solenoid valve in a toilet or washlet setup controls the flow of water automatically, often electrically or electronically, in response to a sensor or a flush control. Key functions include:

• Controlling flush cycles or refilling
• 
  
• Possibly part of auto‑flush, bidet spray, or washlet (heated seat, bidet spray) systems
• 
  
• Turning water on/off under electric control

What Parameters / Specs are Important

To understand or replace a solenoid valve unit like the “HH55007 / SHXA19”, these are the spec/details you need to check:

SpecWhy It MattersVoltage (AC or DC, volts)The coil inside the solenoid must match the supplied voltage (e.g. 12V DC, 24V, 110V, 220‑240V AC etc.)Power consumption / currentTo ensure safe wiring, avoid overloads, ensure compatible control boards.Flow rateHow much water the valve allows through when open (litres per minute, GPM etc.). If too low, flush or refill will be weak.Pressure rangeMinimum and maximum water pressure for correct operation (e.g. 0.05 MPa to 0.75 MPa etc.).Thread connections / inlet…

Toto spares, Toto parts, Toto spare parts, Spare code no : D24047ZR - Flexible hose-up,

What could D24047ZR refer to

• It seems to be a flexible hose spare part used in some TOTO toilets / bidets / seats or Washlets.
• 
  
• Flexible hoses in toilets usually connect water supply (from shut‑off valve) to the fill valve or to washlet fixture, sometimes with specialized connectors.

Things to check / typical specs

Since the official spec wasn’t found, here are the typical parameters for flexible hoses in toilet / washlet / bidet installations; these are the things you need to verify so you can either match the original or find a suitable equivalent.

ParameterTypical Values / What to MeasureHose LengthUsually between ~300 mm to 600 mm typically for fill hoses; longer for bidet / washlet feed hoses. Measure how far from the supply valve to the connection point.Diameter / Flow SizeCommonly ½‑inch BSP/BSPP or metric equivalents, sometimes 3/8‑inch, depending on the region and fixture. Inner bore size influences flow.Thread Type and Size on EndsOne end attaches to the stop valve (supply), the other to the appliance/fill valve. Must match thread size & pitch. Common are ½‑inch BSP, or proprietary TOTO…

Toto spares, Toto parts, Toto spare parts, Spare code no : BOVITINOX - ssbolts & nuts up. What’s known: TOTO H34608007 – Stainless Steel Bolts & Nut

• Brand: TOTO.
• 
  
• Part number: H34608007.
• 
  
• It is labelled as “Stainless Steel Bolts And Nut”.
• 
  
• The item is reportedly discontinued.

What I couldn’t find:

• Exact dimensions (bolt diameter, thread size, length) are not published in the sources I saw.
• 
  
• What specific TOTO models it fits (toilet tank‑to‑bowl, seat hinges, etc.) is not clearly stated.
• 
  
• No mention of grade of stainless steel (304, 316, etc.) for that specific part.

What “SS bolts & nuts up” likely means in this context

• “SS” = Stainless Steel (inox) bolts & nuts: high corrosion resistance.
• 
  
• “Up” possibly means “upper / seat / top / covering”. Could refer to bolts & nuts used in the seat hinge, or tank mounting, etc.
• 
  
• “Bovitinox” is likely a colloquial or local corruption of “Bolt + Inox (stainless)”.

So, in TOTO toilets, this set is possibly used for either:

1. Seat Seat / Toilet seat hinges — securing the toilet seat & cover.
2. 
   
3. Tank to Bowl bolts — fixing the tank (cistern) onto the bowl.
4. 
   
5. Mounting / base bolts in certain models (especially if the bolt set is designed stainless…

Toto spares, Toto parts, Toto spare parts :

1EH501 - horizontal pipe to toilet inlet,

What this part likely is

• The description “horizontal pipe to toilet inlet” suggests a water inlet pipe (fill‑line or feed pipe) that enters the toilet tank (cistern) from the side or back, not from the bottom.
• 
  
• Horizontal feed might refer to a specific configuration where water supply comes in sideways, requiring an elbow or angle connector.

What to check / confirm

To identify the correct replacement you should measure and note:

1. Outer & inner diameter of the pipe on both ends (where it attaches to wall/angle stop, and where it connects to the tank)
2. 
   
3. Thread type and pitch: British Standard Pipe (BSP), NPT, metric thread, etc.
4. 
   
5. Length from the wall/angle-stop to the inlet port of the toilet tank.
6. 
   
7. Material: Is it brass, chrome plated, PVC/PPR, or flexible hose?
8. 
   
9. Angle or orientation: horizontal vs angled, how it bends.
10. 
    
11. Any marking or casting numbers on the part, or what toilet model the tank is.

Possible equivalent parts & where to source

• TOTO's spare‑parts dealers in India might carry something matching; check with authorized service centers.
• 
  
• BeChennai (TOTO spares dealer in Chennai) could help if you show…

Toto spares, Toto parts, Toto spare parts : Spares code no : P711-STIV1 sift closing unit . About the TOTO P711‑STIV1 Soft‑Close Mechanism ('Sift Closing Unit')

From the Vietnamese plumbing retailer HITA, the TOTO P711‑STIV1 is specified as:

• A soft‑closing internal mechanism for toilet seat lids (the “lõi đóng êm của bệ ngồi” in Vietnamese).
• 
  
• Designed as a replacement part specific to the manual washlet seat model TOTO TCW07 (or TCW07S).

Key Details

SpecificationDetailsPart NameSoft‑closing insert mechanismModel NumberP711‑STIV1Fits Seat/Lid ModelTOTO TCW07 (mechanical Washlet seat)FunctionProvides a gentle, silent close actionCategoryToilet seat and cover replacement partsAvailabilityIn stock (per HITA listing)WarrantyNone, as per retailer listing

Context & Use

• P711‑STIV1 is not a full seat or cover—it’s the internal damping mechanism that ensures a smooth, quiet close.
• 
  
• You would install this component within the toilet seat housing (typically replacing a worn or broken soft‑close damper).
• 
  
• This part is intended specifically for the TDW07/TCW07 manual washlet seat, not for electrical or automatic seats.

What’s Still Unclear

Some details are not listed publicly:

• Price details, installation…

Toto spares Toto parts, Toto spare parts, Spare code no : 170.351.00.1 push rod,

Here’s an image of the TOTO part 170.351.00.1—a push rod (sometimes referred to as a 'stick') used for the dual-flush mechanism on certain TOTO toilets, notably models like TOTO TN240275. The item combines black and green rods and is sold as a kit.

What Is the TOTO 170.351.00.1 Push Rod?

Based on the product description:

• Name: Push rod/stick (black and green) designated as part 170.351.00.1.
• 
  
• Purpose: Acts as the actuator that connects the dual-flush button assembly (push plate) to the internal flush valve mechanism.
• 
  
• Compatibility: Specifically listed for the TOTO TN240275 dual-flush toilet model.

How It’s Used

• Function: When you press the flush plate buttons (dual-flush), these rods transmit the push to the flush valve to activate either a partial (green) or full flush (black) cycle.
• 
  
• Installation: They are inserted between the push plate and the valve mechanism. Ensuring proper length and alignment is crucial—otherwise, the flush may not engage fully.

Real-World Insight: The Importance of Rod Length

A user from a plumbing forum shared a common installation issue:

'The actuator rods … needed to be shortened by an…

Toto spares, Toto parts, Toto spare parts, Spare code no : 170.283.00.1 complete button set I couldn’t find a detailed product listing or technical drawing for the TOTO spare part 170.283.00.1 Push Button Complete Set, but here’s what I could uncover:

Information Found

• Import Documentation: The part number 170.283.00.1 appears in Indian import listings as “PUSH BUTTON TOTO SANITARYWARE & FITTINGS”, imported from Indonesia, classified under HSN code 74182020, with a shipment quantity of 7 units valued at approximately

What We Can Infer About Its Use

Based on the description, this part is most likely:

• A complete flush push-button assembly—typically comprising the outer button(s), actuation mechanism, and mounting hardware.
• Used in toilet flush systems, either manual or dual-flush styles.

TOTO frequently uses such assemblies to control water release from concealed or in-wall tanks. These complete sets are commonly removable for servicing or aesthetic upgrades (e.g., chromed or matte finishes).

How to Proceed for More Specifics

1. Refer to the Relevant TOTO Product or Toilet Model
2. If you know which Toto toilet model or in-wall tank unit this part belongs to (e.g., WT151M, WT172M DuoFit, or…

Toto spares, Toto parts, Toto spare parts, Spare code no : 2 Mode Body Shower (Round) Here’s an image of the TOTO Round 2‑Mode Over‑Head Shower—likely what you meant by '2 Mode Body Shower (Round)'—to help visualize the product.

Product Overview: TOTO Round Over‑Head Shower (2‑Mode, Round)

Also listed under model numbers like TBW01005A (India) or TBW01404A (with thermostat valve versions), this is a round-shaped overhead showerhead featuring two distinct spray modes.

Key Features & Technologies

Modes & Spray Experience

• Two Spray Modes:
• Aerial Shower (also referred to in some regions as Warm Spa): A gentle, enveloping warm water stream that simulates a luxurious spa-like feel.
• Comfort Wave: Features balanced drops with sweeping motion and wide coverage for a comfortable rinse.

Design & Specifications

• Shape & Size:
• TBW01005A: Diameter 300 mm (≅ 11.8 inches)
• TBW01404A/TA: Diameter 220 mm (≅ 8.7 inches)
• Finish: Chrome coating with anti-drop safety mechanism for durability and user safety.

• Water Pressure Compatibility: Operates efficiently within a range of 0.25 MPa to 0.75 MPa.

Optional Thermal Control (Depending on Model)

• Some versions include an integrated thermostat valve with…

Toto spares, Toto parts, Toto spare parts, Spare code no : TZH71 - Invisible Fixing Kit.

Here’s an image showing a TOTO invisible fixing kit (part TZH71)—commonly used to mount wall-hung toilets cleanly without visible bolts or screws.

What Is TOTO TZH71 – Invisible Fixing Kit?

The TZH71 is a specialized mounting kit designed for TOTO wall-hung toilet bowls, especially compatible with models such as CW800J, CW812REJT2, and CW822NJW/F, among others

+2Be Chennai

. It’s referred to as “Invisible Fixing” because it enables the toilet to be securely fastened to the wall while hiding all visible hardware, providing a sleek and minimalist aesthetic.

Typical Uses and Benefits

• Secure, concealed mounting: Hides bolts and fixtures for a clean, modern visual that enhances bathroom aesthetics.
• 
  
• Compatible with various wall-hung models: Often paired with TOTO wall-hung toilets like the Avante and Le Muse series
• 
  
• Structural reliability: Ensures sturdy installation while maintaining design integrity.

Availability & Status

• The TZH71 kit is listed as discontinued on the official TOTO Indonesia website.
• . This means it may no longer be stocked in some regions or available through standard distribution…

Toto spares, Toto parts, Toto Spare parts : Spare code no : TX212CWS - DF- Top Push Button.

What Is the TOTO Spare Part TX212CWS – DF Top Push Button?

• Function: This is a dual-flush (DF) top push-button assembly designed to initiate flushing in compatible TOTO toilet systems, especially those with a top-mounted actuator instead of a side lever.
• 
  
• Design: Typically includes dual-press buttons—one for a full flush, the other for a partial flush. The “DF” indicates dual-flush capability.
• 
  
• Application: Used as the flush actuator on the tank lid or integrated top of certain TOTO models, particularly those configured for dual-flush functionality.

Likely Uses & Compatibility

Without specific documentation directly referencing TX212CWS, the best insights come from general TOTO dual-flush button systems:

• Similar assemblies such as THU337#CP + 9AU278 serve as dual-flush push-button spare parts for select elongated models (e.g., MS654)
• Other examples: TOTO offers dual-button plates like YT920#MS/WH (rectangular), YT820#SS/CP (convex dual-button) and YT930#MS (round dual-button) —these are flush plates for in-wall tank systems (WT series)

Based on that, TX212CWS is likely a model-specific or…