Toto spares, Toto parts, Toto spare parts, Spare code no : D24047ZR - Flexible hose-up, What could D...

Toto spares, Toto parts, Toto spare parts, Spare code no : D24047ZR - Flexible hose-up,

What could D24047ZR refer to

• It seems to be a flexible hose spare part used in some TOTO toilets / bidets / seats or Washlets.
• 
  
• Flexible hoses in toilets usually connect water supply (from shut‑off valve) to the fill valve or to washlet fixture, sometimes with specialized connectors.

Things to check / typical specs

Since the official spec wasn’t found, here are the typical parameters for flexible hoses in toilet / washlet / bidet installations; these are the things you need to verify so you can either match the original or find a suitable equivalent.

ParameterTypical Values / What to MeasureHose LengthUsually between ~300 mm to 600 mm typically for fill hoses; longer for bidet / washlet feed hoses. Measure how far from the supply valve to the connection point.Diameter / Flow SizeCommonly ½‑inch BSP/BSPP or metric equivalents, sometimes 3/8‑inch, depending on the region and fixture. Inner bore size influences flow.Thread Type and Size on EndsOne end attaches to the stop valve (supply), the other to the appliance/fill valve. Must match thread size & pitch. Common are ½‑inch BSP, or proprietary TOTO connectors for Washlets etc.MaterialFlexible hose braided stainless steel, sometimes PVC or reinforced rubber inside. The connectors / nuts are typically plated brass, stainless steel, etc. Corrosion resistance matters.Connector StyleFixed nut, swivel nut, with/without washers or gaskets; possibly with O‑rings. Also where the hose bends (ends) – smooth fitting, elbow etc.Pressure RatingThe hose should be rated for the pressure in your plumbing system; typical domestic water pressure might be ~0.3‑0.7 MPa (or more in some areas). Ensure the hose can handle bursts well above that.Certifications / SafetyFood‑grade or potable‑water safe materials; anti‑kink, anti‑burst certifications.

What to do to identify your specific D24047ZR hose

Since the exact spec isn’t found, you can:

1. Remove and inspect the hose: Look for markings on it. Sometimes length, diameter, and part marking are printed or etched.
2. 
   
3. Measure with caliper:

• Thread diameter of the nuts at both ends.
• 
  
• Thread pitch if possible.
• 
  
• Length (nut to nut when stretched/tensioned as in installed position).

1. Compare connector ends: Does one end have an O‑ring, filter screen, or special shape (e.g. for Washlet).
2. 
   
3. Contact TOTO or authorized spare part dealers: Provide them the part code D24047ZR and measurements; they might have internal spec sheets.
4. 
   
5. Check installation manual of your TOTO model (if available). Some manuals list spare hose part numbers and dimensions.

TOTO flush valve replacement, TOTO fill valve repair kit, TOTO toilet flapper replacement, TOTO bidet nozzle parts, TOTO faucet cartridge, TOTO shower diverter valve, TOTO sink drain assembly, TOTO tub spout replacement, TOTO toilet seat hinge bolts, TOTO valve seal kit, TOTO handle replacement, TOTO O-ring set, TOTO gasket washer kit, TOTO inlet valve assembly, TOTO aerator adapter in DUBAI.

TOTO faucet replacement, TOTO toilet flush valve, TOTO sink drain assembly, TOTO shower head gasket, TOTO toilet seat hinge, TOTO tub spout diverter, TOTO O-ring seal, TOTO gasket washer, TOTO cartridge valve, TOTO flush handle, TOTO overflow plate, TOTO trap seal, TOTO bidet nozzle, TOTO escutcheon plate, TOTO pop-up drain stopper in INDIA.

Email : www.bechennai.com, Mobile no ; 888 333 33 22.