Toto spares, Toto parts, Toto spare parts, Spare code no : DUE115UPE - in wall sensor urinal flush v...

Toto spares, Toto parts, Toto spare parts, Spare code no : DUE115UPE - in wall sensor urinal flush valve (AC) 2-3 L,

Here is what I found about TOTO DUE115UPE (in‑wall sensor urinal flush valve, AC) and guidance on specs & sourcing:

What I discovered — specifications & features

• 
  
• On a TOTO India spares listing, they list DUE115UPK / DUE115UPE under “in‑wall sensor urinal flush valve (DC / AC)” with a flush volume of 2‑3 L. bechennai.com
• +1
• 
  
• The “in-wall sensor flush” product line for urinals by TOTO generally supports AC and DC versions (depending on power source) and uses touchless operation. in.toto.com

• 
  
• Related TOTO urinal sensor valves (e.g. DUE114UPE) are rated for water inlet pressures from ~0.05 MPa to 0.75 MPa and have flush volumes of ~1.9 L in some models (for lower flush variants) TOTO
• +2in.toto.com

So combining this, the DUE115UPE is very likely:

• AC‑powered in‑wall sensor (touchless) flush valve
• 
  
• Flush volume: 2 to 3 litres (as per the TOTO India spares listing) bechennai.com
• 
  
• Mounting size / face plate dimension: ~ 130 × 130 mm (face surface plate) based on the Vietnamese listing.
• 
  
• It expects standard plumbing water pressure in the range ~0.05 to 0.75 MPa (based on related models in the same product family)
• 
  
• It supports a “concealed / in‑wall” installation behind a panel / flush plate

What you should verify before purchase / installation

To ensure compatibility and correct functioning, these are the key parameters you should check:

ParameterWhat to confirmWhy it mattersFlush volume (2–3 L)Ensure your plumbing and local regulations allow this volume; also matches the TOTO listingIf volume mismatch, may underflush or overflowWater pressure rangeConfirm your site’s pressure is within near 0.05 – 0.75 MPa (or as required by the unit)Too low or too high pressure may cause malfunctionFace plate / mounting dimension (130×130 mm)The wall opening or recess must fit this face / trimOtherwise flush valve will not align cleanlyPower / electrical spec (AC)Need to ensure 220 V AC (or local voltage) compatibility, wiring, electrical connectionMismatch could damage the unitInlet / outlet port sizes & plumbing connectionThreaded or coupling dimensions must match your plumbingFor easy installation and proper sealingDepth / recess behind wallHow far behind the finished wall surface the valve body should extendTo ensure front plate sits flushSensor / electronics compatibility / spare partsThe sensor eye, wiring, electronic board must be serviceable / replaceableFor maintenance over time

Sourcing / buying options

• I could not find a direct product listing via online product searches (in my initial check) specifically titled TOTO DUE115UPE with full specs.
• 
  
• However, the part is listed in TOTO spares / parts catalogs (TOTO India) as a spare for in‑wall sensor urinal flush. bechennai.com

TOTO flush valve replacement, TOTO fill valve repair kit, TOTO toilet flapper replacement, TOTO bidet nozzle parts, TOTO faucet cartridge, TOTO shower diverter valve, TOTO sink drain assembly, TOTO tub spout replacement, TOTO toilet seat hinge bolts, TOTO valve seal kit, TOTO handle replacement, TOTO O-ring set, TOTO gasket washer kit, TOTO inlet valve assembly, TOTO aerator adapter in BANGLADESH.

TOTO faucet replacement, TOTO toilet flush valve, TOTO sink drain assembly, TOTO shower head gasket, TOTO toilet seat hinge, TOTO tub spout diverter, TOTO O-ring seal, TOTO gasket washer, TOTO cartridge valve, TOTO flush handle, TOTO overflow plate, TOTO trap seal, TOTO bidet nozzle, TOTO escutcheon plate, TOTO pop-up drain stopper in INDIA.

Email : www.bechennai.com, Mobile no : 888 333 33 22.