Toto spares, Toto parts, Toto spare parts, Spare code no : TC501-L3- Rubber cushion-p
hat “rubber cushion” in TC501 context likely refers to
Given that TC501 (or its variants like TC501CVK) is a toilet seat & cover with hinges, a “rubber cushion” part is likely one of:
- A cushion pad / bumper under the seat or lid, where the seat rests when lowered
- A rubber spacer / buffer inside the hinge or pivot area to reduce noise or wear
- A rubber gasket / washer around hinge mounts to provide a secure fit and prevent slipping or damage to the bowl surface
So “Rubber Cushion‑p” might be the code TOTO uses (internally or regionally) for one of these cushioning or damping rubber parts associated with the TC501‑L3 variant.
Relevant related information and parts listings
- The TOTO spare parts listing for Chennai includes TC501CVK – Seat & Cover – Soft Close among its spares. bechennai.com
- TOTO’s spares line‑ups typically list seat & cover based parts (hinges, soft close, etc.) but do not break down every internal rubber / cushion pad publicly. bechennai.com
- In other TOTO product lines (e.g. in Washlets / lids), there is a “lid cushion” spare part — for example, TOTO’s THU9488 Top Lid Cushion for SW574 is sold as a cushion for washlet toilets.
- However, that THU9488 cushion is for a different product type (washlet lid), not directly for the TC501 seat hinge cushion.
Thus, there is precedent that TOTO uses cushion / pad parts in seat / lid assemblies, even if the exact “TC501‑L3 Rubber Cushion‑p” is not documented.
What you should do to identify / obtain the exact Rubber Cushion‑p part
Here’s a practical step‑by‑step approach to get the correct rubber cushion part for your TC501‑L3:
- Disassemble the hinge / seat interface carefully
- Remove the seat and lid from the hinges, open any hinge covers, and locate all rubber parts (bumper pads, spacers, cushions) around pivot points or contact surfaces.
- Look for markings / molds
- Inspect each rubber cushion / pad for any moulded marks, letters, numbers (e.g. “P”, “‑p”, or partial codes) that might correspond to “Rubber Cushion‑p”.
- Measure dimensions
- For each rubber part, measure outer diameter, thickness, inner bore (if applicable), any lip or shoulder. This is critical to match a replacement.
- Compare with similar TOTO parts
- Use known TOTO cushion parts (such as THU9488 for washlet lids) to compare style or rubber material to see if geometry or rubber hardness is similar.
- Contact TOTO support / spare parts department
- Provide them the full seat model “TC501‑L3.”
- Include photographs (close‑ups of the rubber cushions in place).
- Share your measurements.
- Ask whether “Rubber Cushion‑p” is a known part and request its part number or drawing.
- Check regional / dealer spares catalogs
- Sometimes the local TOTO dealers or service centers have internal parts lists or exploded diagrams that list smaller rubber parts (cushions, bumpers) associated with seat hinge assemblies.
- Visit a TOTO spares shop with the part
- If possible, bring the seat or hinge assembly with you to a TOTO spare parts shop. They may visually identify the cushion and supply a matching rubber pad or set.
TOTO flush valve replacement, TOTO fill valve repair kit, TOTO toilet flapper replacement, TOTO bidet nozzle parts, TOTO faucet cartridge, TOTO shower diverter valve, TOTO sink drain assembly, TOTO tub spout replacement, TOTO toilet seat hinge bolts, TOTO valve seal kit, TOTO handle replacement, TOTO O-ring set, TOTO gasket washer kit, TOTO inlet valve assembly, TOTO aerator adapter in UK.
TOTO faucet replacement, TOTO toilet flush valve, TOTO sink drain assembly, TOTO shower head gasket, TOTO toilet seat hinge, TOTO tub spout diverter, TOTO O-ring seal, TOTO gasket washer, TOTO cartridge valve, TOTO flush handle, TOTO overflow plate, TOTO trap seal, TOTO bidet nozzle, TOTO escutcheon plate, TOTO pop-up drain stopper in INDIA.
Email : www.bechennai.com, Mobile no : 888 333 33 22.
Keywords
