Latest updates

Toto spares, Toto parts, Toto spare parts, Spare code : TX442SIZ - Single Lever Bath Shower mixer with diverter.

• TOTO’s official (Indonesia) site lists TX442SIZ under “Shower Mixer Diverter / Mixer Diverter” with the description “Single Lever Bath & Shower Mixer With Diverter”. TOTO
• 
  
• However, that product page notes “DISCONTINUED”. TOTO
• 
  
• The listing page also mentions that CAD drawings (.DWG), manual (.PDF), Revit / 3D files are or were available (or linked) in the product page. TOTO
• 
  
• TOTO also lists similar models in the “TX442” family (e.g. TX442SV, TX442SX, etc.) as single lever bath/shower mixers with diverters. TOTO
• +2TOTO
• 
  

So, TX442SIZ is (or was) one variant in TOTO’s mixer line, now discontinued. But many of its specifications (especially hydraulic / pressure ranges) are likely similar to sibling models in the TX442 series.

Likely / Known Specifications & Features

Because the TX442SIZ page is thin on details, one must rely on context and related models in the same family. Here are expected and known specs:

ParameterLikely Value / RangeNotes / Source / InferenceTypeDeck / wall (depending on installation) single lever mixer with diverterIt’s described as “Single Lever Bath…

Toto spares, Toto parts, Toto spare parts, Spare code no : TX277SV1 - Stop valve w-o Flexible hose,

• It’s a stop valve (angle / shut‑off valve) sold as a TOTO supplementary part, specifically without flexible hose.
• 
  
• The TOTO Indonesia site lists it under “Stop Valve without Flexible Hose” and notes the product is discontinued. TOTO
• 
  
• TOTO India’s site gives a dimension spec: 65 D × 46 H mm (diameter × height) for TX277SV1.
• 
  
• In sales / product listings, more specification details are given:
• Thread / connection: ½ inch (i.e. “Drat 1/2” in some Indonesian listing)
• 
  
• Material: brass (kuningan) with chrome finish in many listings
• Working pressure range: 0.05 – 0.75 MPa (as listed in one vendor’s spec)
• It is sold as a “stop valve w/o flexible hose” (i.e. the body only, no attached supply hose)

Likely / Inferred Details & Characteristics

From the combination of official listing + vendor data, here are the likely characteristics of TX277SV1:

• Body / Material: Brass construction with chrome plating for corrosion resistance and finish.
• 
  
• Connection / Thread Type: ½″ (likely a standard plumbing thread such as BSP or NPT, depending on region) connection at least at one end (as per vendor listings).
• 
  
• Dimensi…

Toto spares, Toto parts, Toto spare parts, Spare code no : TN91-5RR - Water inlet Unit,

• TN91‑5RR is a Japanese (literally “water supply fitting / inlet fitting”) listed as a spare part for TOTO.
• 
  
• The part listing mentions that TN91‑5RR (formerly TN91‑5N) is used in various automatic / sensor urinal models of TOTO, including:

• US800C, US800CE, US800CK (low lips, auto‑flush urinals) US810 series, US820 series, US860 series (floor / wall mounted automatic urinals)

Thus, its primary application is as the water inlet connection / fitting in automatic flush / sensor urinal units.

Known specifications / features from listing

From the Japanese parts listing page:

• Price: ~ 7,000 yen (including tax) as a spare part.
• It explicitly states the part is shipped in 2–3 business days (for non–made‑to‑order stock) for typical orders.

However, the listing does not provide detailed dimensional data (e.g. thread size, bore diameter, length) in that source.

Inferred / likely technical details & parameters to confirm

Because it is a water inlet fitting used in automatic urinals, you can expect (or need to check) the following typical parameters:

ParameterLikely / Typical Values / ConsiderationsNotes / what…

Toto spares, Toto parts, Toto spare code no : TN78-9V800 - self powered Controller,

• TOTO’s SELFPOWER technology refers to sensor faucets that generate their own electricity from the flow of water (micro‑turbine / generator) rather than relying solely on external power or batteries.
• 
  
• In such systems, the kinetic energy of flowing water or a small turbine inside the faucet is converted to electrical energy (or used to charge an internal storage) that powers the sensor, control electronics, and solenoid valve.
• 
  
• The master catalogue for TOTO mentions (in its descriptive text) that “micro sensor power generator integrated into the tip of the water turns the power spout … the energy from the flowing water is used to charge a battery that powers the faucet. The faucets require practically no maintenance.”
• 
  
• For a similar controller (TN78‑9V900), the catalogue lists “Self Powered Controller Cold Water Flow Rate: 2 L/min” in the TOTO master catalogue.
• For TN78‑9V800 together with TEN12AV800, one listing says:

“Nguồn năng lượng: Pin dự trữ + Bộ phận tự tái tạo năng lượng”

“Năng lượng tiêu thụ: 0.4W (0.6W khi hoạt động)”

Flow: 3 L/min; Pressure: 0.05 MPa – 0.75 MPa

• So the TN78‑9V800 appears to be…

Toto spares, Toto parts, Toto spare arts, Spare code no : TH675 - Piston Valve,

What is TOTO TH675 Piston Valve

• The listing “TOTO Piston Valve For Auto Clean U (For Tea100D Type) TH675” shows that TH675 is used in TOTO’s “Auto Clean U” series, likely for flush / cleaning mechanism in toilets.
• 
  
• A spec sheet from MISUMI (a parts supplier) mentions for TH675:
• Full length: 38 mm
• Material: stainless steel + rubber (i.e. the piston body or stem is stainless, sealing parts are rubber or elastomer)
• 
  
• It is marketed as “Piston Valve for Auto Clean U, TH675”
• In a TOTO parts / spare site, the Thai site lists TH675 as the piston / plunger set (ลูกสูบ) for TEA99 (i.e. flush valve / toilet model)

Thus, TH675 is a piston / plunger assembly used in TOTO automatic / self‑cleaning flush / cleaning valves (Auto Clean or similar series).

Key specifications / dimensions to note (from available data)

From the MISUMI listing:

• Length (overall): 38 mm
• 
  
• Materials: Stainless steel + rubber substitute (i.e. elastomeric seals)

Beyond that, the full internal details (diameter, stroke, seal dimensions, spring force, matching valve housing dimensions) are not publicly given in sources I checked.

What more you need / what…

Toto spares, Toto parts, Toto spare parts, Spare code no :TH652-3 - Plunger,

• In TOTO / sanitary plumbing terms, a plunger often refers to a movable sealing component (often inside a valve or faucet) which moves to open or close a passage (e.g. for flushing, or to allow water flow).
• 
  
• It could be part of a flush valve, solenoid valve, or internal cartridge mechanism: e.g. the plunger is lifted (by water pressure, spring, or electromagnet) to allow flow, and then returns to seat to seal.
• 
  
• In solenoid valves, the plunger is usually a metallic (or partly metallic) rod or pin with a seal that moves axially, guided inside a coil or housing, pressing against a valve seat under spring bias when de‑energized.
• 
  
• The plunger likely includes a seal / gasket (rubber, O‑ring, etc.) to ensure watertight closure when in the closed position.

What key dimensions / specs you’ll want

To get a working replacement or understand how the plunger works, these are the important parameters you should aim to measure or request:

ParameterWhy it mattersHow to obtain or requestLength / strokeThe distance it moves from closed to openFrom an existing part, using calipers / micrometerDiameter / cross‑sectionTo fit inside the…

Toto Spares, Toto parts, Toto spare parts, Spare code no : TEN12EV800 - Auto Faucet Cold water spout basin mixer,

• TEN12EV800 is listed in TOTO’s product listings / dealer catalogs as an automatic faucet cold water spout.
• One listing describes “TOTO Automatic Faucet TEN 12EV800 — faucet only (1 pc)” indicating it's sold as the spout / faucet unit (presumably with sensor / controller)
• It appears alongside other TOTO auto‑faucets in the same catalog / range, indicating it is part of TOTO’s sensor / automatic faucet line.

So, this is a sensor / automatic cold water faucet (i.e. no hot water mixing) that you can use on basins, likely deck mounted or wall mounted depending on the variant and installation.

Likely advantages / benefits of using TEN12EV800 (Auto Faucet)

Given TOTO’s technology and what auto faucets typically offer, here are the advantages you would expect:

Feature / BenefitExplanation / Why it mattersHands‑free / touchless operationBecause it is sensor‑activated, users don’t need to physically touch handles. This improves hygiene (less cross‑contamination) especially in washroom / public / high usage settings.Water saving / efficient flowAuto faucets typically run for only as…

Toto spares, Toto parts, Toto spare parts, Spare code no : T6JV2N - Pop up waster for basin without over flow slot,

• T6JV2N is a “One Push Pop‑Up Waste Without Overflow Hole” for basins (i.e. it is a push‑button / pop‑up drain that doesn’t have an overflow opening)
• The TOTO Master Catalogue (2024) lists:

“Pop up waste for basin without over flow slot” with code T6JV2N.

• It gives the size as 66 W × 79 D mm
• On TOTO Indonesia’s product page, it’s shown but currently marked as discontinued.

So this is the correct pop‑up waste you requested (“for basin without overflow slot”).

Example product / substitute

Here is one listing/product that matches the description:

• Toto 3 inches Regular Waste Couplings T6JV2N — listed as a chrome finish coupling for T6JV2N style waste.
• 
  
• Also, a counterpart for overflow type is Toto 3 inches Regular Waste Couplings T6JV6 (though with overflow) for comparison.

The first one is likely the correct match for your requirement (without overflow).

Things to confirm / check before purchase or installation

Even with the right part, you should check:

• Diameter & thread / coupling size — ensure it matches your basin’s waste hole.
• 
  
• Depth / height — so the pop-up mechanism fits…

Toto spares, Toto parts, Toto spare parts, Spare code no : SP71049 - Flane cover tx469seck4,

• The model TX469SECK4 appears in a listing of TOTO product codes on a TOTO spares / parts website (among many other part codes) in the context of “TX” series fittings / fixtures. WELCOME TO BHARAT ENTERPRISES
• 
  
• The reference “flange cover” suggests SP71049 is a cosmetic or protective cover that fits over a flange (probably a wall or floor connection) to conceal or finish the opening around a pipe or the spout mounting.
• 
  
• Such covers are often used to hide mounting hardware, gaskets, or rough edges where a pipe or spout passes through a wall or surface.

What to look for / what parameters matter

To identify or procure a correct SP71049 flange cover, these are the dimensions and characteristics you will want to confirm:

ParameterReason / UseHow to measure or requestOuter diameter (OD)So it fully covers the flange / openingMeasure across the widest partInner diameter (ID)So it fits over the pipe / flange without interferenceMeasure the internal openingThickness / depthTo ensure it sits flush and doesn’t protrude too farMeasure from front face to back faceMaterial & finish (plastic, chrome, brass…

Toto spares, Toto parts, Toto spare parts, Spare code no : SHXBP52- Aerator eck & wall spout,

• An “aerator” in faucet / spout terminology is a device (insert) that mixes air into the water stream to reduce flow and create a soft, non‑splashing jet.
• 
  
• “Eck & wall spout uses” suggests that this aerator might be used both in deck-mounted (sink/faucet “eck”) and wall-mounted spouts.
• 
  
• The “SHXBP52” code falls into the TOTO spare parts naming scheme (SHX... series), which is used by many TOTO spare parts dealers (especially regionally).
• 
  
• Because typical TOTO faucet aerators are small inserts (often brass, plastic, with fine mesh or orifice control), this SHXBP52 is likely to be similar in size to other TOTO aerators (i.e. of small diameter, with threading or press‑fit design).

What you should find / measure to identify it precisely

To get the correct replacement or specification, these are the parameters you need:

ParameterTypical Range / What to CheckThread size (if threaded)Common faucet aerator threads are ½‑inch, M22×1, M24×1, etc.Diameter of the outer partSo it fits into the spout housingInternal orifice / mesh sizeDetermines flow (e.g. 1.5 L/min, 2.2 GPM etc.)Shape / sealing methodFla…