Latest updates

Toto spares, Toto parts, Toto spare parts, Spare code no : SHXAP02 - Flow Regulator,

• I located many TOTO flow regulators (for example TOTO THP3451 0.5 GPM is a known flow regulator used in faucets)
• 
  
• TOTO also sells adapters and similar small parts for regulating flow (e.g. THP4424 is a flow regulator adapter for the Soiree faucet)
• 
  
• The “SHXAP… / SHXAX / SHXAS / SHXAV / SHXAK” family of codes appears in listings by TOTO spares sellers (e.g. Bharat Enterprises in Chennai lists various SHX‑series spare codes) WELCOME TO BHARAT ENTERPRISES
• +1
• 
  
• However, none of those sources gives dimension, flow rate, internal design, or installation details for SHXAP02.

What to determine / ask for when tracing specifications

Given that “flow regulator” in plumbing / faucet / toilet terms generally means an insert or device that constrains the flow (to a specified rate, e.g. litres per minute or gallons per minute), the important parameters you should seek are:

ParameterWhy it mattersHow to measure or askFlow rateTo ensure it regulates to the required maximum (e.g. 0.5 GPM, 1.5 L/min etc.)Check manufacturer spec or test with a known head and measure outputConnection / mounting interfaceTo fit into the existing…

Toto spares, Toto parts, Toto spare parts, Spare code no : 34931600 - Nipple for inlet valve,

What a “nipple for inlet valve” generally means

• In plumbing (especially cisterns, tanks, toilets, etc.), a nipple is usually a short pipe with threads on both ends used to connect two fittings (for example, connecting the inlet valve to the water supply or to a pipe).
• 
  
• The “inlet valve” in this context is likely the fill valve (or ballcock, or similar device) for a tank where water enters.
• 
  
• So the nipple will have some thread specifications (diameter, pitch, male/female) and material (brass, chrome-plated, stainless, etc.).

Steps to identify the exact details

Here are practical steps you (or a plumber/supplier) can take to pin down the specs and find a replacement:

1. Check the valve or tank itself

• Sometimes the mating part (on the inlet valve) will have its thread dimensions (for example, “½‑inch male”, or “¾ — 14 NPT”, or metric like “M22 × 1”).
• 
  
• Also note whether it's straight or tapered threads (e.g., NPT, BSP, etc.).

1. Remove and measure

• If you can safely remove the nipple (or existing one), measure its outer diameter, inner diameter, length, and thread pitch.
• Use a thread gauge if available to find…

Toto spares, Toto parts, Toto spare parts, Spare code no : HH54004S - Controller unit ,

Here’s what I found on TOTO spare “HH54004S — Controller unit”, along with interpretation, possible uses, and things to verify.

What is known / confirmed

• HH54004S is listed as a controller for TOTO urinal / sensor flush system
• 
  
• Specifically, it’s described as “CONTROLLER FOR UFS800CK, 820CK, 860CK” in a listing.
• In the “TOTO Urinal Infrared Sensor Control System Complete Set,” the HH54004S is given as one of the referenced parts.

So in short: HH54004S is the control module / controller (likely the electronics / logic unit) for TOTO’s urinal infrared / sensor flush systems for certain model lines (UFS800CK, 820CK, 860CK)

Likely functions & role in the system

Because HH54004S is a controller in a sensor / infrared flush system, its role probably includes:

1. Sensor signal processing
2. Receiving input from infrared / proximity sensors in the urinal system to detect user presence or departure, triggering a flush cycle.
3. Timing & logic control
4. Deciding when to flush (immediately after user leaves, or a short delay) and possibly controlling pre‑flush or repeated flushes if needed.
5. Controlling a solenoid /…

Toto spares, Toto parts, Toto spare parts, Spare code no : DUE115UPE - in wall sensor urinal flush valve (AC) 2-3 L,

Here is what I found about TOTO DUE115UPE (in‑wall sensor urinal flush valve, AC) and guidance on specs & sourcing:

What I discovered — specifications & features

• 
  
• On a TOTO India spares listing, they list DUE115UPK / DUE115UPE under “in‑wall sensor urinal flush valve (DC / AC)” with a flush volume of 2‑3 L. bechennai.com
• +1
• 
  
• The “in-wall sensor flush” product line for urinals by TOTO generally supports AC and DC versions (depending on power source) and uses touchless operation. in.toto.com

• 
  
• Related TOTO urinal sensor valves (e.g. DUE114UPE) are rated for water inlet pressures from ~0.05 MPa to 0.75 MPa and have flush volumes of ~1.9 L in some models (for lower flush variants) TOTO
• +2in.toto.com

So combining this, the DUE115UPE is very likely:

• AC‑powered in‑wall sensor (touchless) flush valve
• 
  
• Flush volume: 2 to 3 litres (as per the TOTO India spares listing) bechennai.com
• 
  
• Mounting size / face plate dimension: ~ 130 × 130 mm (face surface plate) based on the Vietnamese listing.
• 
  
• It expects standard plumbing water pressure in the range ~0.05 to 0.75 MPa (based on related…

Toto spares, Toto parts, Toto spare parts, Spare code no : DH840G - SHXAQ45 - Valve unit,

However, based on patterns in TOTO spare parts naming and what limited listings exist, I can offer hypotheses about what this valve unit might do, and how to figure out its actual function / use in your system. Then, if you want, I can try deeper searches in Japanese / TOTO internal catalogs.

What I found / hints

• A Chennai parts‑supplier listing (Bharat Enterprises) enumerates spare parts like SHXAQ40, SHXAK47, SHXAK44, etc., as “complete valve units” (e.g. “complete valve unit 3.0 LPF / 0.5 LPF”) under “TOTO spares”. WELCOME TO BHARAT ENTERPRISES
• 
  
• The presence of “SHXAQ45” in your name suggests it’s part of the “SHX A Q” series of TOTO valve / flush / control assemblies. The suffix “45” might refer to a variant / generation / capacity.
• 
  
• The “DH840G” prefix might indicate a model line or installation family (e.g. “DH” for a certain type of unit, “840G” for variant).

So it’s likely that DH840G‑SHXAQ45 is a valve / flush / control unit used in TOTO toilets / washlets or related assemblies (inlet / flush / auto flush or sensor control) rather than a diverter or spout.

Possible uses / functions (educated…

Toto spares, Toto parts, Toto spare parts, Spare code no : DBS101VG - Bath & Spout,

• The part “DBS101VG” appears in a listing of TOTO products (Be Chennai / TOTO India) under “Bath & Spout DBS101VG” in their product inventory list. bechennai.com

• 
  
• That listing suggests that it is considered part of the bath accessory / spout line (i.e. the spout component for a bathtub setup). bechennai.com
• 
  
• The listing doesn’t provide dimensions, materials, or other specifications.

In absence of an official spec, one can infer likely features from comparable TOTO bath spouts:

• Many TOTO bath spouts are made of brass with nickel + chrome plating (or similar corrosion‑resistant finishes).
• 
  
• Water pressure ratings for bath spouts generally range around 0.05 MPa to 0.75 / 1.0 MPa in many TOTO products.
• 
  
• The connections are typically standard plumbing threads (e.g. ½″, BSP, etc.), but exact size must match your plumbing.

What you should determine (or request) to get full “details”

To properly identify or replace “DBS101VG”, you’ll need the following:

ParameterWhat to measure / askWhy it mattersOverall length & projection (how far it sticks out)Measure from the wall to the spout outletEnsures water lands…

Toto spares, Toto parts, Toto spare parts, Spare code no : 34931600 - Nipple for inlet valve

To source or verify a replacement nipple for an inlet valve, you’ll want to know:

ParameterWhy it mattersThread size / pitch (both ends)To match to the supply line and the inlet valveOuter diameter / inner diameter (for the passage)To ensure flow and fitLength of the nippleTo ensure it reaches / mates properlyMaterial (brass, stainless, etc.)For corrosion resistance and durabilitySeal / washer / O‑ring detailsTo prevent leaksType of connection (male/male, male/female, compression, union, etc.)To match existing hardwarePressure ratingShould match or exceed that of the inlet valve assembly

What you can try / next steps

1. Check TOTO spare parts catalogs / contact TOTO support
2. Ask TOTO (India or global) for the part “34931600” and whether they have a technical drawing or cross‑reference.
3. Inspect the existing nipple
4. If the current one is still in place (even if damaged), measure the dimensions and thread form. Use a thread gauge if possible (e.g. metric vs BSP, etc.).
5. Search plumbing suppliers / OEM parts dealers
6. Once you know the size and thread spec, you can source a matching nipple from plumbing…

Toto spares, Toto parts, Toto spare parts, Spare code no : 34800300-1 - Right Hook,

What I checked / what was found

• I searched for “TOTO 34800300‑1” and “TOTO Right Hook 34800300‑1” but found no matches in TOTO’s accessory or spare parts catalogs.
• 
  
• TOTO does have robe hooks / wall hooks under model numbers such as YRH406C (size 55 × 40 × 48 mm) in its accessory roster. TOTO
• 
  
• The nomenclature “Right Hook” suggests this “hook” is some kind of accessory (likely for hanging, e.g. robe / towel / bathrobe hook), but the “34800300‑1” doesn’t correspond in public listings I could access.

What I infer / possible parameters

Given the context (hook accessory) and how TOTO labels accessories:

• “Right Hook” might imply that there is a pair of hooks (left & right) and this is the right‑hand version.
• 
  
• Dimensions are likely small (a few centimeters), as most bathroom accessory hooks are compact.
• 
  
• The construction is likely metal (stainless, brass, or chrome‑plated) to resist corrosion in bathroom settings.
• 
  
• It will include mounting hardware (screws, wall plugs) if it's meant to fix to tile or drywall.

What to do to get the precise details

To get the exact dimensions, material, and compatibility, here are…

Toto spares, Toto parts, Toto spare parts, Spare code no : TT9101 - Diverter unit,

ere’s what I gathered, and what steps you can take:

What is known / educated guesses

• TT9101 is listed by Indian spare‑parts importers / distributors as a “diverter unit” for TOTO. WELCOME TO BHARAT ENTERPRISES
• +1
• 
  
• It is likely an internal diverter mechanism or cartridge used in TOTO mixer / shower systems (or bath/shower diverters) to route water between two or more outlets (e.g. from mixer to shower head / bath spout).
• 
  
• The spare parts listings suggest that the TT9101 is part of a product group that also includes cartridges, handles, spindle, O‑rings etc. WELCOME TO BHARAT ENTERPRISES
• 
  
• However, I did not locate any official TOTO datasheet or catalog page specifically for “TT9101”.

What is unknown / missing

• Dimensions (height, diameter, port sizes)
• 
  
• Material (brass, plastic, stainless, etc.)
• 
  
• Flow / pressure ratings
• 
  
• Compatibility (which TOTO mixer or shower models use TT9101)
• 
  
• Internal design (number of ports, switching mechanism)
• 
  
• Seal / O‑ring details

What you can do to get full details

1. Contact TOTO / authorized service center
2. If you supply the model of the shower / mixer / unit in which TT9101 is used (or a photo) they…

Toto spares, Toto parts, Toto spare parts, spare code no : TT6501 - Flow regulator in stop valve,

However, here are useful steps, inferences, and what to look for to identify or replace the TT6501 flow regulator:

What a “Flow Regulator in Stop Valve” Typically Means

• A flow regulator (or flow restrictor) inside a stop valve is a small insert or mechanism that limits the water flow rate even when the valve is fully open.
• 
  
• Its purpose is often to control flow, reduce water consumption, maintain pressure balance, or provide a safe maximum flow in certain fittings (e.g. washlets, sensor faucets, bidet toilets).
• 
  
• In a stop valve (angle valve / shutoff valve), the regulator is often an insert, mesh / screen, or orifice that sits within the valve body.
• 
  
• The stop valve’s handle or shutoff mechanism still works fully, but the flow through it is limited by the regulator.

What to Check / Measure to Replace or Source It

Because TT6501’s specs are not easily available, you’ll need to measure or inspect the existing regulator. Here’s what to check:

Parameter / FeatureHow to Measure / IdentifyWhy It’s ImportantValve / Stop Valve Brand & ModelIdentify the stop valve (angle valve, inline stop, washlet…