Latest updates

Toto spares, Toto parts, Toto spare parts, Spare code no : TT2105 - Foaming cap,

Based on that, here is what can be inferred about TT2105 (Foaming Cap), what you should check, and how to identify the correct replacement.

What a Foaming / Foam Cap Does in Faucets

A “foaming cap” or “foam cap” is the aerator insert or device that mixes air with water at the outlet of a faucet to produce a smooth, aerated (bubbled) flow rather than a full solid stream. Some key points:

• It typically sits at the mouth (tip) of the faucet spout (or in the spout’s end fitting).
• 
  
• It contains internal mesh / honeycomb / media that force the water to entrain air, reducing splashing and lowering perceived flow while maintaining comfortable pressure.
• 
  
• The “cap” nomenclature suggests it is screwed or fitted into the end of the spout (often removable for cleaning or replacement).
• 
  
• It may have a specific thread (or size) and seating gasket to seal properly.

In the case of TOTO’s THYB68‑1, the foam cap has:

• A thread diameter of M24
• Is made of brass material (as per listing)

So, TT2105 is likely similar in concept, but for a different faucet series or design.

What to Determine / Measure to Get the Correct TT2105 or Equivalent

Be…

Toto spares, Toto parts, Toto spare parts, Spare code no : TT2108 - Aerator,

Here’s what “aerator” implies, what to check, and how you can identify or use a TT2108 in practice:

What an Aerator Does in Faucets

An aerator is a device fitted at the tip (mouth) of a faucet spout that mixes air into the water stream, reducing water flow while maintaining the feeling of pressure. It helps:

• Save water
• 
  
• Reduce splashing
• 
  
• Improve perceived water pressure
• 
  
• Filter debris / prevent clogging (in some designs)

In TOTO faucets, aerators are often removable, cleanable, or replaceable as part of maintenance.

What “TT2108” Likely Represents

Given that TT2108 appears in spare parts listings under a category “aerator” bharat-group.com

, the code TT2108 is probably the internal / spare part code for a specific aerator (or aerator insert / assembly) for one or more TOTO faucet models.

It might be:

• The aerator insert / flow restrictor / nozzle unit that fits into a faucet spout
• 
  
• A full aerator housing + insert assembly
• 
  
• A model‑specific aerator dimension (thread size, flow rating) suited to certain TOTO faucets

What You Should Check / Determine

Since the exact spec is not found, to use or replace TT2108 you should:

1. Remove the…

Toto spares, Toto parts, Toto spare parts, Spare code no : TT5602 - Solenoid valve unit,

What I could find

• In an import manifest listing (HSN code 84818090 for sanitaryware & fittings), TT5602 Solenoid Valve is mentioned as a TOTO spare imported from Thailand.
• 
  
• Unfortunately, I was unable to locate a manufacturer datasheet or a technical drawing that gives all the internal dimensions or electrical specs for TT5602.

So the public data is quite limited — TT5602 is confirmed to exist as a solenoid valve spare, but its operational parameters (voltage, size, pressure rating, etc.) are not easily found online.

What you should check / measure to get a matching replacement

Because the spec is not readily available, to source a suitable replacement you’ll want to identify:

ParameterWhy it's neededHow to measure / findVoltage & electrical type (AC or DC)To ensure compatibility with control electronicsLook at the label/markings on the old coil; check wiring / connectors; check the equipment manual.Port size / thread / connection typeTo ensure plumbing connections matchMeasure inlet/outlet thread diameter, pitch, or identify G‑thread / NPT / BSP etc.Orifice / flow ratingTo ensure it allows…

Toto spares, Toto parts, Toto spare parts, Spare code no : TH61372M- lever assembly,

hat “lever assembly” typically means in TOTO / plumbing context

In toilets and flush systems, a “lever assembly” typically refers to the mechanism by which a manual flush is actuated. It could include:

• The flush lever / trip lever (the handle that you press or push)
• 
  
• The arm inside the cistern that connects the external lever to the flush valve (via rod or linkage)
• 
  
• The pivot / bearing or bracket that supports the lever
• 
  
• Retention / fasteners, washers, seals, etc.

So TH61372M lever assembly is likely a flush or trip lever mechanism (or part thereof) used in a TOTO cistern or flushing system.

What you should check / what to confirm

Since the exact part is elusive, to confirm and source a replacement you should do the following:

1. Check the cistern / tank model
2. Identify the make and model of the TOTO cistern or the toilet (e.g. TOTO model number). The parts list for that cistern often lists the lever / flush handle part.
3. Inspect the existing lever assembly
4. Remove the tank lid and inspect the lever: note how it is mounted (inside wall, side wall, etc.), how it connects to the flush valve (chain, rod, linkage), the…

Toto spares, Toto parts, Toto spare parts, Spare code no : TT5601 - Solenoid valve,

However, here’s how you can approach obtaining the correct solenoid valve, and a few possible compatible replacements to check against:

What to Determine / Verify

Before ordering, you’ll want to know a few key parameters of the existing/faulty solenoid valve:

ParameterReason / ImportanceVoltage / Electrical SpecificationSolenoids may be DC (e.g. 6 V, 12 V) or AC (e.g. 220 V). Using the wrong voltage will either not work or burn out.Port size / thread / connection typeThe inlet and outlet port sizes (e.g. ½', ¾', M type thread) must match plumbing.Operating pressure rangeThe valve must reliably open/close under your water pressure (min & max).Orifice / flow capacityTo avoid restriction, ensure flow rating is sufficient.Body material & sealing (diaphragms, gaskets)For durability, compatibility with water (e.g. brass, SS, suitable diaphragm material).Physical dimensions / mounting / orientationTo fit in the same space and align connections.

If you can retrieve a service drawing, exploded parts list, or measure those from the existing valve, that will help you pick an exact match.

Possible Compatible…

Toto spares, Toto parts, Toto spare parts, Spare code no : TN78-9V900-eco powered DC Control unit, ere’s what I found out about TOTO TN78‑9V900 (Eco Powered DC Control Unit) — its use, features and role — and what is still unclear / needs confirmation.

What TN78‑9V900 is / what it is used for

From the information available, TN78‑9V900 is a self‑powered / Eco‑powered DC control (sensor) unit used in touchless / automatic faucets (lavatory taps) by TOTO.

Key usage / function roles:

• It is paired with TOTO automatic / sensor faucets (cold water) to detect hands and control water flow.
• 
  
• 
  
• 
  
• It uses a self‑generated power / energy harvesting mechanism (sometimes called “Eco‑power”) so that the sensor and valve mechanism do not rely solely on external batteries or direct electrical supply.
• 
  
• 
  
• It is designed to consume very low power: in idle or sensing mode it may consume ~0.4 W; under active operation ~0.6 W (as per some listings).
• 
  
• 
  
• It works under a water pressure range, typical for sensor taps: ~0.05 MPa to 0.75 MPa (i.e. 0.5 to 7.5 bar or similar) in various market specs.

• It is used in TOTO’s cold‑water sensor faucet models, e.g. models TEN12ANV900 / TEN40ANV900 + TN78‑9V900 etc.

• The control unit…

1. Toto spares, Toto parts, Toto spare parts, Spare code no : THX207V6 - Waste Fitting,
2. Customs / Import Listing
3. There is a listing that refers to “THX207V6 Pop‑Up Fitting TOTO Sanitaryware & Fittings” in an import manifest (HSN code 74182020).
4. This shows that THX207V6 is indeed considered a pop‑up / waste fitting in the TOTO sanitaryware lineup.
5. Similar / Adjacent Models

• TOTO has a well-known pop‑up waste called T6JV6. Its specs are Ø 66 × 78.5 mm (diameter × height) and it’s made of nickel‑chrome plated brass. TOTO
• 
  
• The “S411TT” is described as a connector for pop‑up waste (for models like T6JV2N, T6JV6) plus a P‑trap. th.toto.com
• +1
• 
  
• The listing “Bộ thoát thải TOTO HTHX207V6” (Vietnamese “waste discharge / waste outlet TOTO HTHX207V6”) appears in a Vietnamese plumbing site.
• 
  
• Also, THX207V6 appears in that listing under “bộ thoát thải” (meaning waste / discharge).

From these, we can reasonably infer that THX207V6 is a pop‑up waste fitting or “plug & waste / waste outlet” in TOTO’s catalog (or formerly so).

Likely / Inferred Specifications & Details

Based on the clues and similarity to existing TOTO pop‑up wastes, here is what is plausible (but you should confirm with a TOTO…

Toto spares, Toto parts, Toto spare parts, Spare code no : TC501-L4 Metal washer - p,

Inference & likely role of “Metal Washer‑p” in TC501 context

Given that TC501 (and variants such as TC501CVK) is a TOTO toilet seat & cover (with soft‑close hinges)

bechennai.com a “Metal Washer‑p” suffix is likely a small part associated with the hinge or mounting hardware. The “L4” variant suggests that in the “L‑series / variant 4” of the seat/cover, that particular metal washer part had a specific dimension or version.

So the “metal washer” is likely:

• A flat or shaped metal washer used under a hinge bolt, pivot, or mounting screw
• 
  
• A washer that helps in spacing, stabilizing, or distributing load for the hinge assembly
• 
  
• Possibly a washer that mates the seat hinge to the bowl, or under the hinge pivot (to reduce friction or wear)

Because it’s a “metal washer”, it is likely made of stainless steel (or corrosion‑resistant metal) to match the hinge hardware longevity.

What you need to identify the exact “Metal Washer‑p”

To source or replicate this washer, you should get:

1. Outer diameter (OD) — the outer dimension of the washer
2. 
   
3. Inner diameter (ID) / bore — the hole diameter that fits the bolt / pivot
4. 
   
5. Thick…

Toto spares, Toto parts, Toto spare parts, Spare code no : TC501-L3- Rubber cushion-p

hat “rubber cushion” in TC501 context likely refers to

Given that TC501 (or its variants like TC501CVK) is a toilet seat & cover with hinges, a “rubber cushion” part is likely one of:

• A cushion pad / bumper under the seat or lid, where the seat rests when lowered
• 
  
• A rubber spacer / buffer inside the hinge or pivot area to reduce noise or wear
• 
  
• A rubber gasket / washer around hinge mounts to provide a secure fit and prevent slipping or damage to the bowl surface

So “Rubber Cushion‑p” might be the code TOTO uses (internally or regionally) for one of these cushioning or damping rubber parts associated with the TC501‑L3 variant.

Relevant related information and parts listings

• The TOTO spare parts listing for Chennai includes TC501CVK – Seat & Cover – Soft Close among its spares. bechennai.com
• 
  
• TOTO’s spares line‑ups typically list seat & cover based parts (hinges, soft close, etc.) but do not break down every internal rubber / cushion pad publicly. bechennai.com
• 
  
• In other TOTO product lines (e.g. in Washlets / lids), there is a “lid cushion” spare part — for example, TOTO’s THU9488 Top Lid Cushion for…

Toto spares, Toto parts, Toto spare parts, Spare code no : TC501-L2,

What is known about TC501 / TC501CVK

• TC501CVK is listed by TOTO as a soft‑close toilet seat & cover.

Be Chennai

• It is used with wall‑hung toilets (for example, paired with the TOTO Renesse wall hung toilet model CW512YR / 9AE0017 / TC501CVK). sardargroup.iq
• 
  
• The seat & cover is cited in TOTO’s spare parts / dealer listings. Be Chennai
• +2Be Chennai
• +2
• 
  
• In one specification brochure, TC501CVK’s dimensions are given as 396 × 575 × 67 mm (W × D × H), material is urea resin, and hinges are stainless steel. Be Chennai
• 
  
• TC501CVK is shown discontinued in a TOTO Europe listing. Be Chennai

Given this, it is plausible that TC501‑L2 is a variant (regional, hinge type, color, revision) of TC501 / TC501CVK.

What “TC501‑L2” might imply and what to look for

Because “L2” is not documented in sources I saw, here are plausible interpretations and areas to verify:

• Hinge / lid variant: “L2” might denote a particular hinge style (e.g. left vs right hinge, quick release type, or a later revision).
• 
  
• Color / finish variant: Perhaps “L2” is a suffix for color (e.g. off‑white, special shade) or surface finish.
• 
  
• Version / generation: “L2” might be a…